Standard pressure gauges and thermometers generally deal with ambient temperatures right down to -40 �C. But what must be the features of a mechanical measuring instrument that works perfectly well in polar climates with even lower temperatures? This is often explained using the WIKA POLARgauge� as an example. The product family has been designed designed for measurement at extremely low ambient temperatures down to -70 �C. The instruments are mainly used in crude oil and natural gas processing; for example, in the neighborhood pressure and temperature tabs on pumping stations and pipelines.
เกจวัดแก๊สหุงต้ม �C ? this value is frequently exceeded faster than one thinks. That is demonstrated with a turn to Russia. There, tables with standard temperature values even indicate a lot more than -60 �C for a few regions. For mechanical instruments which will be operated in such ambient conditions, two critical points must be observed:
For pressure measurement at extremely low ambient temperatures only available with filled case: The WIKA pressure gauge model PG23LT.
1. The case filling
A measurement at extremely low ambient temperatures requires filled-filled measuring instruments. The liquids useful for this protect the instrument from condensation formation within the case caused by temperature fluctuations. They thus prevent the window from frosting, in order that the measured value can be read safely.
However, the majority of silicone oils useful for this purpose begin to solidify at temperatures below -40 �C. The movement then no longer works, or can even freeze. Application-aligned tabs on the parameters (e.g. process pressure) can’t be ensured.
Therefore, for the POLARgauge� series a particular low-temperature silicone oil has been specified. This oil remains in circumstances that enables correct measurement and measured value display, even at -70 �C.
The case of the POLARgauge� model PG23LT (r.) in comparison to a standard version (l.): It has no elastomers.
2. The elastomers
Elastomers are found in all mechanical pressure gauges or thermometers. They offer a secure sealing between your individual components. In detail, they are the flat gasket at the window, sufficient reason for pressure gauges and also the blow-out device on the rear of the case and the vent valve for pressure compensation.
However, the sealing materials used in standard designs cannot durably withstand suprisingly low ambient temperatures. They become brittle over time and lose their sealing properties. This results in the event filling escaping. This, subsequently, leads to the formation of condensation and the frosting of the window.
Therefore, in the development of the POLARgauge� series, elastomers have already been eliminated in all critical points. The seal between the window and case is made from a special material. It really is adapted to extremely low ambient temperatures. The vent valve includes a stainless steel cap.
Summary of the WIKA POLARgauge� series
Note
You can get further information on the POLARgauge� series on the WIKA website via the next links. The merchandise family currently comprises four instrument types: The Bourdon tube pressure gauge model PG23LT, the differential pressure gauge models 733.51, 733.31 (filled versions of the models 732.51, 732.31), the bimetal thermometer model 55 and the gas-actuated thermometer model 73. Thus, a suitable variant is available for every application. Would you like to buy differential pressure gauge models? In our WIKA online-shop you will discover a few of our standard designs. For those who have any further questions, your contact will gladly help you.