Peumatic Grouting pump is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the free rock mass. The most grain size can’t exceed 0.2 mm.
Grouting pressure gauge แบบ น้ำมัน and upkeep is easy, safe and reliable. This pump is utilized in mines working underneath troublesome circumstances because it’s dependable and explosion-proof.
Basic Pneumatic Grouting pump embrace: An air inlet, the pneumatic cylinder, mounting base body and stand, pressure gauge, pumping cylinder, outlet with quick release coupling and wheels.
How it really works
Pneumatic pressure within the air cylinder exerts a high strain on the grout combination which results in ejection of grout with a high stress and velocity. The valves of the air cylinder in the pump function automatically to actuate the cylinder. The pneumatic cylinder then strikes the plunger up and down to complete the pumping cycle.
Pneumatic grout pump can be pushed even with out Electrical power supply in distant areas through the use of engine pushed compressor.
Applications
The pump is majorly utilized in construction and mining industry for injecting materials into wide and medium measurement hole in beams, columns ,basement walls and flooring, lift shaft concrete wall fill-up etc. In mining business it’s used to refill cement answer the place there’s a gap exists between structure and rock and for soil stabilization.
Detachable design tends to straightforward maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is extensively used in tunnels, coal mine, bridges and dams, building basis, and different underground tasks, and inflammable, explosive websites and different bad surroundings.
It has software in chemical industry also to pump out chemical slurries.
The pump is electrical energy free so, can be utilized at any site condition whether or not it is rural or urban.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the ultimate quantity of the grouting quantity is 8 or10 times of the amount in the beginning. And the ultimate grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specifically designed for high-pressure grouting. And it adopts full hydraulic drive, it’s pressure and circulate may be adjusted in accordance with the requirements of grouting,(The move of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be utilized for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electricity, development, mining and so on. ground/underground building.
Benefits
Mining Pneumatic Grouting pump has the benefits of low power consumption, small vibration, low noise, small dimension, excessive efficiency, dependable efficiency, pressure and circulate management, long life and so on. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can additionally be Light weight and with a wheelie design it can be carried simply. It is designed for simple operation and low upkeep. Last but not least its spare elements are easily obtainable.
Share