The versatility of Pneumatic high strain grouting pumps

Peumatic Grouting pump is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the free rock mass. The most grain measurement can not exceed 0.2 mm.
Grouting pump operation and upkeep is easy, protected and dependable. This pump is used in mines working under tough circumstances as a outcome of it is dependable and explosion-proof.
Basic Pneumatic Grouting pump include: An air inlet, the pneumatic cylinder, mounting base body and stand, stress gauge, pumping cylinder, outlet with fast release coupling and wheels.
How it actually works
Pneumatic stress within the air cylinder exerts a high strain on the grout combination which ends up in ejection of grout with a excessive stress and velocity. The valves of the air cylinder within the pump function automatically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump can be pushed even with out Electrical power provide in distant areas by utilizing engine pushed compressor.
The pump is majorly used in development and mining industry for injecting materials into broad and medium measurement hole in beams, columns ,basement partitions and flooring, carry shaft concrete wall fill-up and so forth. In mining trade it is used to replenish cement answer where there is a gap exists between construction and rock and for soil stabilization.
pressure gauge ลม tends to straightforward maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is broadly utilized in tunnels, coal mine, bridges and dams, constructing basis, and other underground tasks, and inflammable, explosive websites and different unhealthy setting.
It has utility in chemical business additionally to pump out chemical slurries.
The pump is electricity free so, can be utilized at any website situation whether it’s rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment range. Generally the ultimate quantity of the grouting volume is 8 or10 occasions of the quantity in the beginning. And the final grouting amount proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s stress and flow may be adjusted in accordance with the necessities of grouting,(The flow of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).in addition to, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is especially used for highways, railways, water and electricity, building, mining and so on. ground/underground development.
Mining Pneumatic Grouting pump has the advantages of low power consumption, small vibration, low noise, small dimension, high efficiency, reliable efficiency, stress and circulate management, long life and so on. Common mine grouting pump has pneumatic injection pump, dual fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can be Light weight and with a wheelie design it may be carried simply. It is designed for simple operation and low maintenance. Last but not least its spare parts are simply obtainable.

Leave a Comment