Tsurumi’s small dewatering pump, the LB series, is designed for purposes where house is tight, particularly building. Secured by rope or chain, an LB can be used in purposes which involve narrow pipes, small tanks, deep pits and in remote locations that are troublesome to reach with larger equipment. The LB mannequin has a totally symmetrical design with no protruding components, allowing it to be lowered to unknown depths with none risk of snagging. With a diameter of solely 187 mm, the pump’s spherical cross-section even suits into smaller filter pipes. There is also เกจวัดแรงดัน1บาร์ with a water degree sensor which is only a few millimetres longer. The pump then controls itself mechanically, switching on or off relying on the water level. The LB presses water with filth particles up to 6 mm in dimension through the housing, permitting optimal cooling of the motor. The models within the sequence pump 225–440 l/minute and to a maximum of 17.5 m. The smallest mannequin weighs around 10 kg dry, the largest around 30 kg.
Share